Blogs, PSM Newsletter | December 15, 2022
When most people think of agriculture, they do not think of pumps. Yet upgrading the nation’s irrigation system’s 600,000 pumps to more energy efficient models and using underground pipes could slash energy use in half.
Blogs, PSM Newsletter | December 15, 2022
A new document makes it much easier to create training programs and assess what pump professionals really know.
Blogs, PSM Newsletter | December 15, 2022
There are several reasons why engineers typically oversize pumps when designing hydraulic systems. First, they want to build in a margin of error to accommodate uncertainties or changes in design or as facilities evolve. Second, engineers know that fouling, rust, sediment, and increased internal running clearances will reduce performance over time.
Blogs | December 7, 2022
The Hydraulic Institute and Europump collaborated on the publication of Application Guideline for Variable Speed Pumping, which assists VSP end users and system integrators in the proper selection, specification, installation, control and operation of VSP equipment.
Blogs | December 7, 2022
This article is aimed at defining the terms so that pump users understand their meanings. Users can also learn about resources available to better understand the requirements and why it is important to operate a pump within its POR and with adequate NPSH margin.
Blogs | December 7, 2022
To understand how the viscosity of a liquid affects a pumping system, it is important to understand what viscosity represents. By definition, viscosity is the property of a liquid that causes it to offer resistance to shear stress such as that caused by liquid flow, primarily in the area of the pipe wall.
Blogs, Technical, Standards | November 9, 2022
In 250 BCE, Ancient Greeks and Romans used a device called the Archimedes screw: the first water pump, which was shaped as a giant screw and used to raise water. ANSI/HI 14.6-2022: Rotodynamic Pumps For Hydraulic Performance Acceptance Tests provides critical performance test procedures for rotodynamic pumps to ensure they are safe to use.
Blogs, Workforce Development | October 3, 2022
Like most industrial and manufacturing industries, the pumping and fluid handling industry is facing workforce challenges. This includes a challenge to attract young professionals to the manufacturing, construction and municipal industries.
Blogs, PSM Newsletter, Regulatory | September 27, 2022
After years of delay, the U.S. Department of Energy is putting the final touches on its circulator pump efficiency regulation. Expect to see the new rule before the end of the year and likely take effect sometime within the next three or four years.
Blogs, Energy Efficiency, PSM Newsletter | September 27, 2022
Energy organizations and utilities are learning how to leverage DOE regulations, pump efficiency labels, and utility programs to speed the adoption of high-efficiency pumps.
Get the latest pump industry news, insights, and analysis delivered to your inbox.