Training Pump FAQs eStore
Current Version: ANSI/HI 9.6.2-2015
Next Version: 2020
This standard includes recommendations for assessment of applied nozzle loads for the following pump types. When specified by the user, pumps supplied shall conform to these requirements.
Many other pump types are not included because of the different designs that are unique to each manufacturer. For pump types outside the scope of this standard, allowable nozzle loads should be established by the pump manufacturer, applied nozzle loads predicted by the purchaser, and differences, if any, negotiated and resolved by the two parties.
Chair: Lucian Dobrot - ITT - Industrial Process
Vice Chair: Jim Roberts - Xylem Inc. - Applied Water Systems
Currently Not Seeking Members
View in eStore
Back To Top
Current Version: None
Next Version: 2019
Scope: 'Will be seeking ANSI approval; new guideline describing methods and criteria to determine the allowable nozzle loads for pumping machinery for different pump types, pump sizes, materials of construction, and pressure classes.
Chair: Clint Zentic - Sulzer Pumps USA Inc.
Vice Chair: Open
Currently Seeking Members
Current Version: ANSI/HI 9.6.6-2016
Next Version: 2021
This standard applies to rotodynamic pump types, in all worldwide markets. It provides required and recommended ractices for pump piping that, if followed, should reduce the risk of the pump failing to perform properly due to interaction with the system. Excluded is any piping integral to the pump unit, such as auxiliary or lubricant piping. This document is intended to complement ANSI/HI 9.8 Intake Design for Rotodynamic Pumps. To eliminate the possibility of overlapping and possibly conflicting standards, this document is considered to be applicable as follows:
Chair: Patrick Moyer - Weir Minerals North America
Vice Chair: Daniel Boldt - Weir Floway, Inc.
Current Version: ANSI/HI 9.8-2012
Next Version: 2017
surface intake designs for Rotodynamic pumps as referenced in the Hydraulic
Chair: Jack Claxton - Patterson Pump Company
Vice Chair: Andrew Johansson - Alden Research Laboratory Inc.
Next Version: 2018
Scope: 'Will be seeking ANSI approval; the scope of the committee is to develop nomenclature for horizontal and vertical rotodynamic pumps of centrifugal (radial), mixed, and axial flow type.
Co-Chair: Albert Ticknor - National Pump Company
Co-Chair: Michael Mueller - Flowserve Corporation
Scope: 'Will be seeking ANSI approval; the scope of the committee is to develop design and applications for horizontal and vertical rotodynamic pumps of centrifugal (radial), mixed, and axial flow type.
Co-Chair: Michael Coussens - Peerless Pump Company
Vice Chair: Paul Ruzicka - Xylem Inc.- Applied Water Systems
Co-Chair: Al Iseppon - Pentair - Berkeley
Scope: 'Will be seeking ANSI approval; the scope of the committee is to develop installation, operation and maintenance for horizontal and vertical rotodynamic pumps of centrifugal (radial), mixed, and axial flow type.
Co-Chair: Ernest Sturtz - CDM Smith
Co-Chair: Paul Ruzicka - Xylem Inc.- Applied Water Systems